In 4+ years working with hundreds of decorator shops, designers, and contractors, we see the same mistakes repeat — costing time, money, and clients. Top 10 mistakes and how to avoid them.
1. Measuring at only one point
Windows are never perfectly rectangular. Always measure at 3 points (top, middle, bottom) — take the smallest.
2. Wrong fabric for sun exposure
South-facing offices with standard polyester: fades in 6 months. Use sun screen or UV-resistant for south/west exposure.
3. Ignoring window opening direction
Check opening direction before ordering. Inward-opening windows need wall-mounted (not recessed) blinds.
4. Mixing colors and types in same room
Always same type and color per room. Different rooms can vary, but consistency within each.
5. Cheap mechanism for premium space
Mechanism quality should match space quality. Chainless (spring-loaded) for premium projects.
6. Ordering before windows are installed
Never order before physical window installation. Wait, measure from real window, then order.
7. Blackout where daylight is needed
Ask client how often blind will actually be down. If <30% of workday — use zebra or sun screen instead.
8. No service access
Always ensure 30cm service space around cassette for future cleaning and adjustment.
9. Motorized without power in window frame
Plan motorized blinds during electrical phase, not after window installation.
10. Ordering from screen samples only
Always order physical fabric samples before large orders. We send free to B2B partners.
Conclusion
Most mistakes cost zero to avoid — just 5 minutes of attention during measurement or client discussion. That saves days of rework and lost clients.
Order free fabric samples for your clients
Sample kit (zebra, sun screen, blackout, wood) free for B2B partners.
Send inquiry →